Ease Release® 200 is an excellent general purpose release agent for making molds and casting parts. This product will release polyurethane elastomers, epoxy resin, polyester resins, RTV silicones, rubber, and thermoplastic polymers. Ease Release® 200 is effective on aluminum, chrome, RTV silicone, epoxy, rubber, and steel molds. Ease Release® 200 General Purpose Release Agent The Material Safety Data Sheet (MSDS) for this or any Smooth-On product should be read prior to use and is available upon request from Smooth-On. All Smooth-On products are safe to use if directions are read and followed carefully. Keep Out of Reach of Children.
Click Here For TDS
IMPORTANT - The information contained in this bulletin is considered accurate. However, no warranty is expressed or implied regarding the accuracy of the data, the results to be obtained from the use thereof, or that any such use will not infringe upon a patent. User shall determine the suitability of the product for the intended application and assume all risk and liability whatsoever in connection therewith.Safety First!EaseReleaseWeight/Gallon Solvent Carrier DryingRate Flammable WettingQuality200AerosolN/A DichloromonofluoroethaneDimethylmethane ButaneVery Fast No Excellent205 6.0# Petroleum Hydrocarbons Fast Yes Excellent207 6.4# Petroleum Hydrocarbons Slow Combust. Good081610-JRCall Us Anytime With Questions About Your ApplicationToll-free: (800) 762-0744 Fax: (610) 252-6200The new www.smooth-on.com is loaded with information about mold making, casting and more.www.smooth-on.comFeatures:• Easy to apply• Fast drying• Effective over a broad temperature range from 70°F to 500°FProvides:• Excellent release• Precise duplication of mold details• Less rejects, fas